AFDARAالعربيةSign in

Home / Resources / Deepwater Horizon, 2010

Asset Management Review · No. 03

Deepwater Horizon, 2010

When unverified barriers and delayed detection compounded. A reliability and asset management reading of the case, with five practical checks for operators.

AFDARA · Version 1.0 · November 2026 · 5-page PDF, free

Summary

On 20 April 2010 the Macondo well in the Gulf of Mexico blew out beneath the drilling rig Deepwater Horizon. Gas reached the rig and exploded; 11 workers died and 17 others were critically injured. A cemented shoe-track barrier at the bottom of the well was not effective, a test of that barrier was misread, and the blowout preventer (BOP) did not seal the well. We review the case with a bow-tie view, a contributing-factor map, RCM and an ISO 55001:2024 lens, and turn it into five checks.

Key findings

  1. The shoe-track cement barrier was not effective, and a negative pressure test was misread as a success.
  2. Hydrocarbons flowed for almost an hour without detection.
  3. The BOP’s emergency system had wiring and battery faults, and buckled pipe stopped the shear ram from sealing.
  4. Personal safety was tracked and rewarded more than process safety.

A barrier you have never tested is a hope, not a barrier. Verify the last line of defence before you need it.

Five practical checks

  1. Test criteria before the test Write down what a pass looks like, in numbers, before any barrier test. If the result is unclear, stop and escalate.
  2. Credited barriers, verified Before displacement or removal of a barrier, verify the site-specific minimum barrier requirement in the well-control program and applicable regulation, confirm that the credited barriers are available under the planned conditions, and stop if the test evidence is ambiguous.
  3. Monitoring during every fluid move Do not bypass flow monitoring during displacement or other activities.
  4. Test the last line of defence Functionally test emergency shutdown and BOP emergency systems, including batteries and wiring, at a justified interval.
  5. Track barrier health, not only injuries Report well-control and barrier indicators to senior management alongside safety statistics.
Question for your team

Which barrier are you relying on today that has never been tested on demand?

Common questions

What happened in the Deepwater Horizon blowout?

On 20 April 2010 the Macondo well in the Gulf of Mexico blew out beneath the drilling rig Deepwater Horizon Gas reached the rig and exploded; 11 workers died and 17 others were critically injured.

What are the main asset management lessons from the Deepwater Horizon blowout?

The shoe-track cement barrier was not effective, and a negative pressure test was misread as a success. Hydrocarbons flowed for almost an hour without detection. The BOP’s emergency system had wiring and battery faults, and buckled pipe stopped the shear ram from sealing. Personal safety was tracked and rewarded more than process safety.

What can a site check today?

The paper gives five checks: Test criteria before the test; Credited barriers, verified; Monitoring during every fluid move; Test the last line of defence; Track barrier health, not only injuries. A barrier you have never tested is a hope, not a barrier. Verify the last line of defence before you need it.

This page summarises the full paper. The PDF adds the event sequence, a bow-tie view, a contributing-factor map, an RCM table, an ISO 55001:2024 lens, illustrative indicators and the full list of sources. It is a practitioner interpretation from public sources, not legal or engineering advice.

More from the Asset Management Review